1. Power supply 220V AC, ON-OFF button light is ON state(#1), the Green light ON(#2), then ready to work.
2. Insert the needle into the slot(#5) , Rotate, press until destroyed. Average 2-4 Seconds per one needle.
3. If Red light is ON state(#2), Ash accumulation in slot(#5), the circuit is overloaded, the protection device starts automatically(#4). OFF the power, open slot(#5), clean with steel brush, and press button (#4).
4. During the destruction process with small spark/blast, this is normal.
5. Clean wastage box after use #6, this waste treat with high temperature, no risks.
6. Press syringe barrel body to #7, to cut off syringe tube
7. Cut off the infusion tube in #8.
Comments are closed